RUBI TPI Diamond Blade - Miter in Porcelain

Miter porcelain and glazed tiles with the Diamondblade RUBI TPI.

Diamondblade RUBI specially designed for miter cutting of porcelain and glazed tiles. Use the new Diamondblade RUBI TPI - Porcelain cut for the best finishes during your ceramic placement jobs.

Features of the Diamondblade RUBI TPI - Porcelain cut

• Quality SuperPro for perfect cuts
• 3 outside diameters: 200, 230 and 250 mm
• Designed for miter or diagonal cuts, NOT SUITABLE for straight cuts
• Diamondblade for porcelain and glazed tiles
• Cut tiles with more than 25 mm. thickness
• Not necessary to use flanges for mitre cuts
• Diamondblad RUBI special for mitre cuts with the electric tilecutters RUBI DC, DS and DX
• Type of blade: TURBO Sintering created through laser welding
• Great stability and cutting speed
• Compliant with the EN-13236 standard that prioritizes providing safe and reliable products to customers: "Safety requirements for superabrasive products"

Recommendations for the RUBI TPI diamond blade - Porcelain cut

• It is recommended to make the cut with the part of the ceramic upwards, without touching the enamel
• Always respect the original edge and top edge of the side of the piece
• DO NOT USE with the tile cutters RUBI ND, DU and DV
• Not recommended for straight cuts 
• Use protective equipment while cutting construction materials
• To avoid chipping the ceramic glaze, start cutting 1 mm or 2 mm below. This will prevent the ceramics from decanting and you will have better finishes

Technical features of the models of the Diamondblade RUBI TPI - Porcelain cut

Learn more about the special technical features of each model of these Diamondblades RUBI:

Diamondblade RUBI TPI - Porcelain cut of 200 mm

• Reference: 31966
• Outside diameter: 200 mm
• Inside diameter: 25,4 mm
• Disc segment high: 7,5 mm
• Segment Thickness: 2,5 mm
• Maximum peripheral velocity: 80 m/s
• Maximum RPM: 7.650

Diamondblade RUBI TPI - Porcelain cut of 230 mm

• Reference: 31967
• Outside diameter: 230 mm
• Inside diameter: 25,4 mm (Includes reducer to 22.2 mm)
• Disc segment high: 7,5 mm
• Segment Thickness: 2,5 mm
• Maximum peripheral velocity: 80 m/s
• Maximum RPM: 6.650

Diamondblade RUBI TPI - Porcelain cut of 250 mm

• Reference: 31969
• Outside diameter: 250 mm
• Inside diameter: 25,4 mm
• Disc segment high: 7,5 mm
• Segment Thickness: 2,5 mm
• Maximum peripheral velocity: 80 m/s
• Maximum RPM: 6.150

Buy the Diamondblade RUBI TPI - Porcelain cut for professional finishes on porcelain and glazed tiles.

⚠ The manufacturer preserves the right to change the content at any time without further notice.