Pack 3 Diamond blades RUBI 250 mm to cut porcelain tiles (TPI, CPC, CEV)

RUBI TPI Diamond blade - Miter porcelain and glazed tiles with your electric cutter RUBI DX, DC and DS.

• - Wet cut
• - Miter porcelain and glazed tiles
• - Quality SuperPro
• - Not suitable for straight cuts
• - No chipping or burrs
• - To miter tiles with more than 25 mm. thickness
• - 3 diameters available: 200, 230 and 250 mm

Miter porcelain and glazed tiles with the Diamondblade RUBI TPI.

Features of the Diamondblade RUBI TPI - Porcelain cut

• Quality SuperPro for perfect cuts
• 3 outside diameters: 200, 230 and 250 mm
• Designed for miter or diagonal cuts, NOT SUITABLE for straight cuts
• Diamondblade for porcelain and glazed tiles
• Cut tiles with more than 25 mm. thickness
• Not necessary to use flanges for mitre cuts
• Diamondblad RUBI special for mitre cuts with the electric tilecutters RUBI DC, DS and DX
• Type of blade: TURBO Sintering created through laser welding
• Great stability and cutting speed
• Compliant with the EN-13236 standard that prioritizes providing safe and reliable products to customers: "Safety requirements for superabrasive products"

Recommendations for the RUBI TPI diamond blade - Porcelain cut

• It is recommended to make the cut with the part of the ceramic upwards, without touching the enamel
• Always respect the original edge and top edge of the side of the piece
• DO NOT USE with the tile cutters RUBI ND, DU and DV
• Not recommended for straight cuts 
• Use protective equipment while cutting construction materials
• To avoid chipping the ceramic glaze, start cutting 1 mm or 2 mm below. This will prevent the ceramics from decanting and you will have better finishes

Technical features of the models of the Diamondblade RUBI TPI - Porcelain cut

Diamondblade RUBI TPI - Porcelain cut of 200 mm

• Reference: 31966
• Outside diameter: 200 mm
• Inside diameter: 25,4 mm
• Disc segment high: 7,5 mm
• Segment Thickness: 2,5 mm
• Maximum peripheral velocity: 80 m/s
• Maximum RPM: 7.650

Diamondblade RUBI TPI - Porcelain cut of 230 mm

• Reference: 31967
• Outside diameter: 230 mm
• Inside diameter: 25,4 mm (Includes reducer to 22.2 mm)
• Disc segment high: 7,5 mm
• Segment Thickness: 2,5 mm
• Maximum peripheral velocity: 80 m/s
• Maximum RPM: 6.650

Diamondblade RUBI TPI - Porcelain cut of 250 mm

• Reference: 31969
• Outside diameter: 250 mm
• Inside diameter: 25,4 mm
• Disc segment high: 7,5 mm
• Segment Thickness: 2,5 mm
• Maximum peripheral velocity: 80 m/s
• Maximum RPM: 6.150

Buy the Diamondblade RUBI TPI - Porcelain cut for professional finishes on porcelain and glazed tiles.