With part of its aluminum die-cast cylinder case and crank case
exposed, the DH36DMA looks robust and sophisticated.
One-push Bit Mounting
Only one action instead of the conventional two is required to mount a bit. All that needs to be done is to insert the bit into the tool holder while turning it.
Large Change Lever
Large change lever is located on top of the tool body for easy visibility and smooth mode changing.
Hammering (for demolition)
Neutral (for multiple bit-angle settings)
Rotation + Hammering (for drilling)
Multiple Bit-angle Settings
The chisel can be rotated at 12 different angles with the change lever positioned at 'neutral'.
Low Vibration Handle
The HiKOKI low vibration handle, which consists of the upper unit with rubber dampers and the lower unit with a hinge, reduces vibration and user fatigue, offering high productivity.
Constant Speed Control with Variable Speed
Four-step impact rates between 1,420bpm and 2,860bpm can be selected by the rotation speed selector switch.
A battery stopper helps prevent the battery from accidentally falling out of the tool. The battery cannot be removed unless both the stopper and the battery latches are released.
When the tool bit is suddenly overburdened during operation, the slip clutch disengages the gears or the tool's built-in controller stops
the motor's output before the entire tool jerks.
|Impact energy (J)||8,5 J|
|Operable with one hand||✓|
|Carrying case included||✓|
|No load speed||0 - 1,100|
|Blows per minute (bpm)||0 - 4.300|
|Amp. rating||4 Ah / 8 Ah|
|Number of batteries included||2|
|Max.Ø Drilling Capacity Concrete||40 mm|
|Weight (kg)||7,9 Kg|
|Energía herramienta eléctrica||a batería|